Skip to main content

How to Set Up an ET-732 Thermometer

Updated

If you're having trouble setting up your ET-732 unit, please see the guide below for a simplified set up process.

  • Not pressing any buttons for a few seconds will set whatever is currently on the screen. It is best to perform these steps quickly so you won’t have to start over.

Make sure the devices are being turned on in correct order:

  • Receiver (remote) unit first
  • Transmitter (unit with probes) unit second
  • If you’re having problems connecting the units:
    • Resync manually by pressing and holding button on back of transmitter
    • Replace batteries in both units; low power is the most common cause of connection problems.

 

FOOD Mode - This is the upper field of the ET-732 Receiver. This mode allows for one Set Temperature that will alert once it is reached.

The temperature range is 32°F to 572°F and the default setting is 176°F

Once the ET-732 is programmed, the thermometer will save the most recent settings.

  1.  Press the HI/CLEAR button to display the Set Temperature (default is 176°F)
  2. Press and hold the HI/CLEAR button until the Set Temperature begins to flash (about 2 seconds)
  3. Press the HI/CLEAR button to increase the Set Temperature. Press and hold to increase the temperature rapidly.
    • To lower the temperature:
      • Continue pressing and holding the HI/CLEAR button until it reaches 572°F and resets at 32°F
      • Continue pressing the HI/CLEAR button until you've reached your desired temperature
  4. Press the LIGHT/MODE button to lock your setting
  5. Press the START/STOP button to activate the Alert. The Alert symbol will display underneath the [1] and [2] boxes of each field on the Receiver.

Once the setting has been locked, you will once again see the current probe temperature on the Receiver unit. Press HI/CLEAR once to view your Set Temperature.

BARBECUE Mode - This is the lower field of the ET-732 Receiver. This mode allows for one HI Set Temperature and one LO Set Temperature.

  • Once a HI and LO Temperature are set, the Alert activated, and the LO Set Temperature is exceeded, the ET-732 will Alert when the temperature goes above the HI Set Temperature, or drops below the LO Set Temperature.
  • The range of the HI Set Temperature is 140°F to 572°F and the default is 176°F
  • The range of the LO Set Temperature is 32°F to 554°F and the default is 50°F. The LO Set Temperature cannot be set at a higher temperature than the HI Set Temperature.

To set the HI Set Temperature:

  1. Press the HI/HR button to view the HI Set Temperature (default is 176°F)
  2. Press and hold the HI/HR button until the HI Set Temperature begins to flash (about 2 seconds)
  3. Press the HI/HR button to increase the HI Set Temperature. Press and hold to increase the temperature rapidly.
    • To lower the temperature:
      • Continue pressing and holding the HI/HR button until it reaches 572°F and resets at 140°F
      • Continue pressing the HI/HR button until you've reached your desired temperature
  4. Press the LIGHT/MODE button to lock your setting
  5. Press the START/STOP button to activate the Alert, if the Alert symbol is not already displayed underneath the [1] and [2] boxes of each field on the Receiver.

To set the LO Set Temperature:

  1. Press the LO/MIN button to view the LO Set Temperature (default is 50°F)
  2. Press and hold the LO/MIN button until the LO Set Temperature begins to flash (about 2 seconds)
  3. Press the LO/MIN button to increase the LO Set Temperature. Press and hold to increase the temperature rapidly.
    • To lower the temperature:
      • Continue pressing and holding the HI/HR button until it reaches the HI Set Temperature (or 554°F if HI Set is >554°F) and resets at 32°F
      • Continue pressing the HI/HR button until you've reached your desired temperature
  4. Press the LIGHT/MODE button to lock your setting
  5. Press the START/STOP button to activate the Alert, if the Alert symbol is not already displayed underneath the [1] and [2] boxes of each field on the Receiver.

Using the Timer

  • The ET-732 includes a Timer feature, which can run along side your temperature alerts
  • The thermometer will save the most recently programmed settings, just like in thermometer mode.
  • The minimum setting is 1 minute
  • The maximum setting is 24 hours
  • The timer will display in hours and minutes up to 9 hours and 59 minutes. Timers for 10+ hours will be displayed in hours only.

To set a Count-Down Timer

  1. Press the LIGHT/MODE button on your ET-732 Receiver
  2. Use the LO/MIN button to add minutes and the HI/HR button to add hours
  3. Press the START/STOP/ALERT button on the receiver to start the timer.
  4. The timer will begin, displaying a down arrow symbol flashing on the Receiver.
  5. Stop the timer by pressing the START/STOP/ALERT button on the receiver.
    • This button will also stop the Alert once the timer is complete
  6. Press the HI/CLEAR button to reset the timer to 0:00

To set a Count-Up Timer:

  1. Press the LIGHT/MODE button on your ET-732 Receiver
  2. Press the START/STOP/ALERT button on the receiver.
  3. The Count-Up timer will begin, displaying an up arrow symbol flashing on the Receiver
  4. Stop the timer by pressing the START/STOP/ALERT button on the receiver.
  5. Press the HI/CLEAR button to reset the timer to 0:00

 

 

 

Related articles

Comments

0 comments

Please sign in to leave a comment.

Powered by Zendesk